Skip to main content

Six Leg Kinematic Moving Machine

Four bar linkage are the closed loop kinematic linkage , they perform a wide variety of motions with a few simple parts. This project discusses the design & fabrication of one such mechanism (Four Bar Mechanism). In this project Six Leg Kinematic movement works on Grashof’s principle which states that the sum of the length of the shortest and longest links must be less than or equal to the some of the other two links.

However this condition is necessary but nor sufficient. Mechanism satisfying this condition will fall into crank-rocker mechanism, double crank mechanism and double rocker mechanism. A frame, connecting rod, crank & a lever constitute to obtain the required motion. In this project we tried to show mainly the application of simple four bar mechanism.

PHOTOS & DRAWINGS












APPLICATIONS

It would be difficult to compete with the efficiency of a wheel on smooth hard surfaces but as condition increases rolling friction, this linkage becomes more viable and wheels of similar size cannot handle obstacles that this linkage is capable of. Toys could be developed that would fit in the palm of your hand and just large enough to carry a battery and a small motor. Six leg mechanical spiders can be applicable for the making of robots. It has a wide range of application in the manufacturing of robots. A large version could use existing surveillance technology to convert your television into a real-time look at the world within transmitting range. It would also relay commands from the remote to the spider bike additional frequencies could be used to operate manipulators for retrieving the mail during unfavorable weather or taking the dog out. In toy industries for making robotic toys it has got many applications. It can also be used for military purpose. By placing bomb detectors in the machines we can easily detect the bomb without harmful to humans. It can be used as heavy tanker machines for carrying bombs as well as carrying other military goods. It is also applicable in the goods industries for the small transportation of goods inside the industry. The mountain roads or other difficulties where ordinary vehicles cannot be moved easily can be replaced by our six leg mechanical spider. Heavy loads can be easily transported if we made this as a giant one. It has got further application for the study of linkage mechanism and kinematic motions. The geometry and conditions can be changed according to application needs. It can travel in rough surfaces very easily, so dis machine can be used in rough surfaces were ordinary moving machine cannot travel.

ADVANTAGES

Construction expense is low.
Heavy load can be carried.
It can be run in rough surfaces
Easy to control Maintenance is less

DISADVANTAGES

Speed is minimum due to load.
Not smooth running.
High powered motor is needed.

VIDEO

Comments

  1. i would like to know how to make this and the things that are wanted to make this project pls mail me at abhitimes23@gmail.com....

    ReplyDelete
  2. would like to know how to make this project.
    please email the detail and how it is work and some pictures or videos.
    dkdurgesh27@gmail.com

    ReplyDelete
  3. i am making this in my college as final year project. i need your help

    ReplyDelete
  4. how we use this mechanism? i mean how it is useful for us?
    if i wanna to make this project on it?
    what i need mean componenets and reference?
    my id is n.king@ibbibo.com
    send me information related to it if u can
    thank u

    ReplyDelete
  5. I would like to purchase the report. please email me
    nivedrjn@gmail.com

    ReplyDelete
  6. sir i need your help regarding this project, kindly help me and provide max. number of details of this project.
    my email id is "raghavendrasingh61@gmail.com"

    ReplyDelete
  7. contact me on mraza515@gmail.com . i will help you and send u some relevent material regarding to this project because i recently made this in my 3rd year mini project.

    ReplyDelete
    Replies
    1. assalamualaikum ,, mohsin bhai i need ur help regarding this project plz help me ,my email id is a_s_husain60@yahoo.com
      and contact no is 8087304638

      Delete
    2. walaikumsalam .ya btain k ap ko kya detail ya help chahya regarding this project.
      construction main ya design main ya matrial selection main ya phr kisi r point pa confusion ha.

      Delete
    3. can you please help me in this. i wanted to know the procedure n material required for making this project.

      Delete
    4. sir i need ur help regarding this project ......plz help me.
      e-mail: kshitij.kulshrestha@gmail.com
      mob. no.: 9654092774

      Delete
  8. can i get further details regarding this project? Am planning to put it up as an exhibit for the college tech fest.

    ReplyDelete
  9. hello i need a guidance regarding this project so some one can help me?

    ReplyDelete
  10. Great work buddy :)

    ReplyDelete
  11. I would like to purchase the report. please email me - kirany2k38@gmail.com
    plz help me.. project report needed...

    ReplyDelete
  12. i want to make this project pls help me
    give me proper design
    abhi504vibhani@gmail.com

    ReplyDelete
  13. hi .... i need ur help to build this project...i want the dimensions for the design and if u send me the shop drawing ..... im so thinkfull for ur help
    30931218@students.liu.edu.lb

    ReplyDelete
  14. hi. we need your help about this project because we are going to do it this semester, so if you could please give us informations about dimensions and drawing. we are so thankful for your cooperation.

    alsahamia@gmail.com
    s200836900@kfupm.edu.sa

    ReplyDelete
  15. sir please share the dimensions and material details of this project.... arunpillai060@gmail.com

    ReplyDelete
  16. i need these project caan u help me pls

    ReplyDelete
  17. i did this six leg kinematic walker myself, and submitted on my college, PUDUCHERRY last week................wowwwwww
    i have done many changes in construction, motor selection, sprockets and i used DPDT switch....

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
    2. Can you sell me a piece of ready model as I need to showcase in lab

      Delete
  18. sir, i really need your help we wanna submit report for our final year project so please send me the complete project report to this mail id: sathiyapark@gmail.com

    ReplyDelete
  19. sir, i really need your help we wanna submit report for our final year project so please send me the complete project report to this mail id: pankajnegi1992@gmail.com

    ReplyDelete
  20. This comment has been removed by the author.

    ReplyDelete
  21. sir, i really need your help we wanna submit report for our final year project so please send me the complete project report to this mail id: er.srkhan03@gmail.com

    ReplyDelete
  22. sir, i really need your help we wanna submit report for our final year project so please send me the complete project to my fb : https://www.facebook.com/youssef.mbarek.35

    ReplyDelete
  23. Sir, I m making this project but having problems with dimensioning.
    it would be kind of u, if u help on this matter.
    email id-jain.abhinav05@gmail.com

    ReplyDelete
  24. sir,i need some help for making this project or model.
    what is the application of six leg kinematic moving machine? rep plz

    ReplyDelete
  25. sir can you please tell me how to select the motor for kinematic walker and also the link lengths

    ReplyDelete
  26. please tell me the specification of dc moter which is used in this project

    ReplyDelete
  27. SIR I REALY NEED YOUR HELP ABOUT THIS PROJECT. PLEASE PROVIDE SPECIFICATION OF THIS PROJECT. AND REPORT FILE ALSO..

    ReplyDelete
  28. would like to know how to make this project.
    please email the detail and how it is work and some pictures or videos. surjeetyadav225@gmail.com

    ReplyDelete
  29. I want the specification of component used .like nut and bolt ,link ,motor

    ReplyDelete
  30. I'm making this project full details to me give about this project sir my email address-- ghanteravindra1433@gmail.com

    ReplyDelete
  31. Hello your project is fascinating, i was wondering kf i can get the specifications of the components for my final year project. Email: aliila780@gmail.com

    ReplyDelete
  32. I am making the project in my college. Can i get some more picture of this from different sides

    ReplyDelete

Post a Comment

Popular posts from this blog

Energy generating speed humps

In your view there may be many uses of Speed Humps like Safety, Speed limiting etc, What if i say speed humps can be also used for power generation? you heard me right using a simple setup we can effectively us speed humps for power generation, So why speed humps? After consuming non-renewable source of energy for years people are looking forward for renewable source of energy.Search of energy lead to power generation using sunlight, wind, tide etc.
When talking about new source of energy people are asking for effective, renewable, maintenance less, nature friendly energy sources. When talking about energy generation using speed humps all above conditions are matching so this method can be effectively used to power street lights, traffic signals etc.
BASIC FLOW CHART MATERIALS REQUIRED RackPinionLarge SprocketChainSmall SprocketFlywheelLarge GearSmall GearGeneratorBall Bearing
RACK AND PINION GEARS: The rack and pinion used to convert between rotary and translatory motion. The rack is the…

Mechanical Spider using Klann Mechanism

The invention provides a walking device which stimulates a gait of a legged animal. The device includes a frame with spaced axial mounts, a leg, axially connected upper and lower rocker arms which limit reciprocating leg motion. The leg is driven by a connecting arm powered by a rotating crank. The position and configuration of the axial connecting sites establish a prescribed orbital path that the foot undertakes with each revolution of the crank. Both rocker arms and the crank are axially mounted to the frame.
The leg has a hip joint axially connected to the upper rocker arm for limiting hip motion, a foot and a knee joint axially connected to the connecting arm. The connecting arm has three axial connecting sites, one for connecting to the knee, another to the crank, and a third connecting site defined as a centrally disposed elbow joint connecting site which connects onto the lower rocker arm and limits knee joint motion. Under power, crank rotation is transferred to the connectin…