Skip to main content

Scientists says moon village is not far, can be reality by 2030

A group of scientists has predicted that moon village will be reality by 2030. By the cooperation of astronauts and robotic systems on the moon it will be reality by 2040. Scientists raised this statement during the symposium conducted by European Space Agency (ESA) in Netherlands titled as "Moon 2020-2030, A New Era of Coordinated Human and Robotic Exploration".


According to the scientist more than any other planets like Mars, Moon will be suitable for humans. And by only the cooperation of astronauts & robots Moon village will be possible.

Comments

Popular posts from this blog

Energy generating speed humps

In your view there may be many uses of Speed Humps like Safety, Speed limiting etc, What if i say speed humps can be also used for power generation? you heard me right using a simple setup we can effectively us speed humps for power generation, So why speed humps? After consuming non-renewable source of energy for years people are looking forward for renewable source of energy.Search of energy lead to power generation using sunlight, wind, tide etc.
When talking about new source of energy people are asking for effective, renewable, maintenance less, nature friendly energy sources. When talking about energy generation using speed humps all above conditions are matching so this method can be effectively used to power street lights, traffic signals etc.
BASIC FLOW CHART MATERIALS REQUIRED RackPinionLarge SprocketChainSmall SprocketFlywheelLarge GearSmall GearGeneratorBall Bearing
RACK AND PINION GEARS: The rack and pinion used to convert between rotary and translatory motion. The rack is the…

Six Leg Kinematic Moving Machine

Four bar linkage are the closed loop kinematic linkage , they perform a wide variety of motions with a few simple parts. This project discusses the design & fabrication of one such mechanism (Four Bar Mechanism). In this project Six Leg Kinematic movement works on Grashof’s principle which states that the sum of the length of the shortest and longest links must be less than or equal to the some of the other two links.

However this condition is necessary but nor sufficient. Mechanism satisfying this condition will fall into crank-rocker mechanism, double crank mechanism and double rocker mechanism. A frame, connecting rod, crank & a lever constitute to obtain the required motion. In this project we tried to show mainly the application of simple four bar mechanism.

PHOTOS & DRAWINGS










APPLICATIONS It would be difficult to compete with the efficiency of a wheel on smooth hard surfaces but as condition increases rolling friction, this linkage becomes more viable and wheels of simi…

Mechanical Spider using Klann Mechanism

The invention provides a walking device which stimulates a gait of a legged animal. The device includes a frame with spaced axial mounts, a leg, axially connected upper and lower rocker arms which limit reciprocating leg motion. The leg is driven by a connecting arm powered by a rotating crank. The position and configuration of the axial connecting sites establish a prescribed orbital path that the foot undertakes with each revolution of the crank. Both rocker arms and the crank are axially mounted to the frame.
The leg has a hip joint axially connected to the upper rocker arm for limiting hip motion, a foot and a knee joint axially connected to the connecting arm. The connecting arm has three axial connecting sites, one for connecting to the knee, another to the crank, and a third connecting site defined as a centrally disposed elbow joint connecting site which connects onto the lower rocker arm and limits knee joint motion. Under power, crank rotation is transferred to the connectin…